Tag Custom molded rubber

There are some rubber products that you can’t live without. One of them is the timing belt. The timing belt was introduced in the 1960s. It is made of rubber and has hard teeth. It is present in the internal combustion engine of vehicles and it is an important part for an engine to run. Its function is to synchronize the rotation of the crankshaft and camshaft to enable the pistons and valves of vehicles operate properly. This will help in making the vehicle run smoothly.

Replacing the belt on time is another point you must focus on. After your car or any other automobile runs 60,000-100,000 miles, you should consider getting it replaced. Like custom molded rubber products like gaskets and seals (AS 568 O Rings), a timing belt is also a made from rubber. That is why it will get worn down with time. Upon breaking the engine will not run and your work will come to a standstill. It can result in damage to the different parts of the engine. Not changing the belt on time can cost you a hefty amount later. You may even have to get your vehicle’s engine replaced.

There are several companies that not only manufacture good quality timing belts, but also oil seal, vibration mounts and conveyor belts. One among them is Lusida rubber products.

The timing belt is a rubber product which is an integral part of the internal combustion engine of vehicles. It helps the engine run and you have to get it replaced periodically.

 It is important for molded rubber products to have certain standards. O-rings are no exceptions and there is something called an Aerospace Size Standard for O-Rings AS 568. It is a US standard for O-rings that came into being by the Society of Automative Engineers (SAE). As per this system, a dash “-“ is used to refer to O-ring sizes that are standardized. 

The main benefit of having standardized system is that the engineers can make use of the standard O-ring sizes to build prototypes and test their designs. They would know the size of standard O-rings and they would not have to measure it every time. This brings a sense of uniformity. The Aerospace Standard mentions the cross-sections, inside diameters tolerances and size identification codes for O-rings that are put to use in sealing applications. Talking about the uses of custom molded rubber products like O-rings, they are used in the manufacturing world extensively.  The biggest use of o-rings is that as an oil seal.

 You must note that you can get standard O-ring sizes in different materials. The most common materials used to make o-rings are Nitrile, Neoprene, Butyl, Silicone, Fluorosilicone, Fluorocarbon, and EPDM. 

AS 568 is Aerospace Size Standard for O-Rings to help engineers build prototypes and test designs. O-rings are used widely in the manufacturing world.

There are so many industrial products that help us in our day to day life that we are not able count them. The ones that belong to that category arecustom molded rubber products. 

The most commonly used custom molded rubber products are gaskets and seals, O rings and timing belt. In fact, a lot of things wouldn’t be possible without these products. 

To manufacture custom molded rubber products, there are 3 commonly used techniques and they are the following:

1) Compression molding – For this technique, uncured rubber is used. It is placed in a mold and compressed with the help of heat and pressure. The result is a finished rubber product that is ejected from the mold.

2) Injection molding – This process has been in use since 1960. In this process, pre-heated rubber is injected into a readymade mold with the help of pressure. After the curing is done, the rubber leaves the mold and is ready for use. 

3) Extrusion – Extruded rubber products are put through a die that gives them a tube-like shape. This process is used for rubber pipes and hoses.

The applications of custom molded rubber products are really wide but it is important that they are manufactured properly. 

Custom molded rubber products are manufactured using 3 commonly used techniques that are compression molding, injection molding, and extrusion. The products have a wide number of applications. 

Rubber products of different types are needed to meet the requirements of different industries. Custom molded rubber parts are affordable and last for a longer time period but you must keep certain things in mind prior to choosing the product and they are the following:

Is it durable?

When a rubber part is not durable, it cannot fulfill the requirement. Therefore, while choosing a product, you must make sure that it can function for a longer time period. It has to serve the purpose precisely. You must choose the material based on how well suited it is for the application.

How is the performance?

When the custom molded rubber parts do their work well, they will naturally help in increasing the productivity and the profit you earn. Therefore, it is essential that you select the parts that perform well in every regard. You must choose the material that suits your requirements well.

This applies to all kinds of rubber products including o-rings, timing belt, gasket and seals. They will work well when you choose the ones made of the right material. It is completely based on the purpose for which you are using the molded rubber product. 

Keep the durability and performance of custom molded rubber parts in your mind before choosing them. They can go a long way in increasing productivity and profit. 

Rubber products are used for various purposes all over the world. In fact, the applications of custom molded rubber products are so many that all of them cannot even be listed here. Custom molded rubber products are used in railroads, automobiles, farm equipment, oil and gas industry and many more industries. You will find rubber products in places like elevators, breweries and hospitals for various applications. It is highly likely that you may not have closely observed them but the truth is that they are widely used. 

At home, they are present in commonly used items like garden hoses and drinking straws. This means that rubber products are a part of everyday life and doesn’t stop with use in industries only.

In order to manufacture custom molded rubber products, there are 3 commonly used techniques and they are,

•Compression molding 

•Injection molding

•Extrusion

Rubber manufacturing industries like Lusida Rubber Products are into the manufacture of rubber products and use the above mentioned techniques in the manufacture of the products. They are into manufacturing O-rings and timing belts that are widely used for various purposes across different industries. At Lusida Rubber Products, you can be assured of quality. 

Custom molded rubber products are used widely used for industrial purposes. In addition to that, the products are a part of everyday life.