Tag timing belt

Industries require a lot of products to meet their requirements. There is a huge list of tiny products without which things would come to standstill. A few of them are molded products.

When you talk about molded rubber products, gaskets and seals would come to the mind. They may seem to be similar but the truth is that they are little different from each other. The main difference between gaskets and seals is that while you use a gasket to seal components that have a flat surface while seals are meant for surfaces that rotate like engine parts, shafts and pumps. Gaskets are for components that are static whereas seals are for parts that rotate.

Also, seals are round and flat whereas gaskets come in different shapes.

Gaskets are used in transportation, electricity generation, oil and gas and paper and pulp industry. 

Though gaskets and seals may look like ordinary products, they are very important. Just imagine how your vehicles would run when there are no seals for the engine to function. The whole automobile industry would come to a standstill without seals. This indicates that no matter how insignificant a product looks; at times you can’t do without it.

There are other molded rubber products as well and they are timing belt and O Rings. 

A gasket is meant to seal static components whereas a seal is ideal for surfaces that rotate such as engine parts. 

There are so many industrial products that help us in our day to day life that we are not able count them. The ones that belong to that category arecustom molded rubber products. 

The most commonly used custom molded rubber products are gaskets and seals, O rings and timing belt. In fact, a lot of things wouldn’t be possible without these products. 

To manufacture custom molded rubber products, there are 3 commonly used techniques and they are the following:

1) Compression molding – For this technique, uncured rubber is used. It is placed in a mold and compressed with the help of heat and pressure. The result is a finished rubber product that is ejected from the mold.

2) Injection molding – This process has been in use since 1960. In this process, pre-heated rubber is injected into a readymade mold with the help of pressure. After the curing is done, the rubber leaves the mold and is ready for use. 

3) Extrusion – Extruded rubber products are put through a die that gives them a tube-like shape. This process is used for rubber pipes and hoses.

The applications of custom molded rubber products are really wide but it is important that they are manufactured properly. 

Custom molded rubber products are manufactured using 3 commonly used techniques that are compression molding, injection molding, and extrusion. The products have a wide number of applications. 

Rubber products of different types are needed to meet the requirements of different industries. Custom molded rubber parts are affordable and last for a longer time period but you must keep certain things in mind prior to choosing the product and they are the following:

Is it durable?

When a rubber part is not durable, it cannot fulfill the requirement. Therefore, while choosing a product, you must make sure that it can function for a longer time period. It has to serve the purpose precisely. You must choose the material based on how well suited it is for the application.

How is the performance?

When the custom molded rubber parts do their work well, they will naturally help in increasing the productivity and the profit you earn. Therefore, it is essential that you select the parts that perform well in every regard. You must choose the material that suits your requirements well.

This applies to all kinds of rubber products including o-rings, timing belt, gasket and seals. They will work well when you choose the ones made of the right material. It is completely based on the purpose for which you are using the molded rubber product. 

Keep the durability and performance of custom molded rubber parts in your mind before choosing them. They can go a long way in increasing productivity and profit. 

 There is a wide and varied use of rubber to metal bonded products in a number of industrial applications. Rubber to metal bonding is basically the process of adhering rubber to metal. The rubber becomes stiff enough to get mounted due to the metal and in turn gives the metal the elasticity it needs. 

 Before the molding is done, the metal is treated to remove rust and any kind of impurities. Next, a bonding agent is sprayed on top of it. The rubber, after being dried is placed in the mold for forming and curing.

Rubber to metal bonded products like metal gaskets and vibration mounts are used in aerospace, medical, automotive and industrial applications. You might have even come across these products but must have not keenly observed it. For instance, vibration mounts help in isolating shock, sound and vibration because of machinery. This is much needed in an industrial environment.

As a manufacturer of rubber products, Lusida Rubber products is into making products that involve rubber to metal bonding. It has timing belt and silicone heater hoses on the list as well. However, at Lusida, the client has an upper hand and get products manufactured based on the requirement. 

Rubber to metal bonding has extensive use in different industries. It is the process of adhering rubber to metal. Rubber to metal bonded products are manufactured by Lusida Rubber based on the client’s requirements.